Links

Mold Symptoms references studies from the Environmental Protection Agency, World Health Organization, and State Department of Health. http://www.mold-symptoms.com

An informative article from the Executive Director of the National Organization of Remediators and Mold Inspectors (NORMI)
http://www.normi.org/articles/bleach-mold.php

A Brief Guide to Mold, Moisture, and Your Home from the United States Environmental Protection Agency (EPA).
http://www.epa.gov/mold/moldguide.html

World Health Organization (WHO) guidelines for indoor air quality: dampness and mould.
http://www.euro.who.int/__data/assets/pdf_file/0017/43325/E92645.pdf

Mold image library from the United States Environmental Protection Agency (EPA).
http://www.epa.gov/iedmold1/moldcourse/imagegallery1.html

Information about mold from the New York State Department of Health
http://www.health.state.ny.us/publications/7287/

Center for Disease Control (CDC) mold website
http://www.cdc.gov/mold/

Ten Things You Should Know About Mold from the US EPA

1. Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
   
2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
   
3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
   
4. Fix the source of the water problem or leak to prevent mold growth.
   
5. Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
   
6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
   
7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
   
8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
   
9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
   
10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.